Is there a way to get a better ride out of my 1980 long box 4x4? It doesn't have a lift yet and is riding on 31" tires.Coils aren't in the buget yet.Thanks

Pull a leaf out of each pack.

let some air out of the tires....

I run my yotas tires at around 22 psi. Helps allot. Tire pressures should be figured out by vehicle size and weight, not by what they say on the side of the tire

Is there any soft ride lift kits for these trucks?I have two motors in the back and it"s still stiff( it's not bottomed out)

I also took a spring out of the back and it helped out also.

ya in my old truck each pack in the rear was missing 2 leafs, and the front packs only had 2 leafs total, it was nice and smooth

Air down and take out a leaf or two.
Just like i said.

Less air ,less springs.What about the lift kits for these trucks?
Are there any good ones?

I had the Rancho 3" and it rode like a pallet jack. Not sure what others are like, can't imagine much better. The spring packs all look similar, IE: very few, thick leaves in the packs, doesn't usually make for a soft spring. Guys that are getting a soft, flexy ride are generally swapping in springs that weren't meant for Toyota applications. Waggys, 44044's (waggy lift springs) and YJ rears as well as the stock rears up front are popular. Check it out here: http://www.4x4spot.com/spring_swap_info.htm

I love the ride my Allpro springs give me. Very nice and smooth....

Quote:

---

I had the Rancho 3" and it rode like a pallet jack

---

hay dont dis a PJ like that, they are super fun to ride, you know when you swivel the handle back and forth you can haul ass on those suckers.....oh and leafs suck..get coils..O'Doyle Rules